View ACT108W-600E_3239354.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1. product profile 1.1 general description ac thyristor power switch in a sot223 surface-mountable plastic package with self-protective capabilit ies against low and hi gh energy transients 1.2 features and benefits ? common terminal on mounting base allows multiple acts on shared cooling pad ? exclusive negative gate triggering ? full cycle ac conduction ? remote gate separa tes the gate driver from the effects of the load current ? safe clamping of low energy over-voltage transients ? self-protective turn-on during high energy voltage transients ? surface-mountable package ? very high noise immunity 1.3 applications ? contactors, circuit breakers, valves, dispensers and door locks ? fan motor circuits ? lower-power highly in ductive, resistive and safety loads ? pump motor circuits 1.4 quick reference data ACT108W-600E ac thyristor power switch rev. 5 ? 13 july 2010 product data sheet table 1. quick reference data symbol parameter conditions min typ max unit v drm repetitive peak off-state voltage --600v i gt gate trigger current v d =12v; i t = 100 ma; ld+ g-; t j =25c; see figure 10 1- 10ma v d =12v; i t = 100 ma; ld- g-; t j =25c 1- 10ma i t(rms) rms on-state current full sine wave; t sp 112 c; see figure 4 ; see figure 1 ; see figure 2 --0.8a dv d /dt rate of rise of off-state voltage v dm =402v; t j = 125 c; gate open circuit; see figure 14 1000 - - v/s
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 2 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch 2. pinning information 3. ordering information v cl clamping voltage i cl = 100 a; t p =1ms; t j 125 c; see figure 17 650--v v pp peak pulse voltage t j = 25 c; non-repetitive, off-state; see figure 3 --2kv v t on-state voltage i t = 1.1 a; see figure 13 --1.3v table 1. quick reference data ?continued symbol parameter conditions min typ max unit table 2. pinning information pin symbol description simplified outline graphic symbol 1 ld load sot223 (sc-73) 2cmcommon 3 g gate 4cmcommon 13 2 4 001aaj92 4 g cm ld table 3. ordering information type number package name description version ACT108W-600E sc-73 plastic surface-m ounted package with increased heatsink; 4 leads sot223
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 3 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch 4. limiting values table 4. limiting values in accordance with the absolute maxi mum rating system (iec 60134). symbol parameter conditions min max unit v drm repetitive peak off-state voltage - 600 v i t(rms) rms on-state current full sine wave; t sp 112 c; see figure 4 ; see figure 1 ; see figure 2 -0.8a i tsm non-repetitive peak on-state current full sine wave; t j(init) =25c; t p =16.7ms -8.8a full sine wave; t j(init) =25c; t p = 20 ms; see figure 5 ; see figure 6 -8a i 2 ti 2 t for fusing t p = 10 ms; sine-wave pulse - 0.32 a 2 s di t /dt rate of rise of on-state current i t =1a; i g =20ma; di g /dt = 0.2 a/s - 100 a/s i gm peak gate current t = 20 s-1a v gm peak gate voltage positive applied gate voltage - 15 v p g(av) average gate power over any 20 ms period - 0.1 w t stg storage temperature -40 150 c t j junction temperature - 125 c v pp peak pulse voltage t j = 25 c; non-repetitive, off-state; see figure 3 -2kv f = 50 hz t sp = 112 c fig 1. rms on-state current as a function of surge duration; maximum values fig 2. rms on-state current as a function of solder point temperature; maximum values 003aac822 0 2 4 6 8 10 ? 2 10 ? 1 110 surge duration (s) i t(rms) (a) 003aac807 0 0.2 0.4 0.6 0.8 1 ? 50 0 50 100 150 t sp ( c) i t(rms) (a)
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 4 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch fig 3. test circuit for inductive and resistive lo ads with conditions equivalent to iec 61000-4-5 = conduction angle fig 4. total power dissipation as a function of rms on-state cu rrent; maximum values 003aad07 7 l r 150 5 h 2 220 r g surge generator surge pulse iec 61000-4-5 standards r gen open circuit voltage dut load model 1.2 s/50 s waveform 003aac803 0 0.2 0.4 0.6 0.8 1.0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 i t(rms) (a) (w) p tot = 180
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 5 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch f = 50 hz fig 5. non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values t p 20 ms fig 6. non-repetitive peak on-state current as a function of pulse width; maximum values 003aac804 0 2 4 6 8 10 11010 2 10 3 number of cycles i tsm (a) i tsm t i t t j(init) = 25 c max 1/f 003aac805 1 10 10 2 10 3 10 ? 5 10 ? 4 10 ? 3 10 ? 2 t p (s) i tsm (a) i tsm t i t t j(init) = 25 c max t p
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 6 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch 5. thermal characteristics table 5. thermal characteristics symbol parameter conditions min typ max unit r th(j-sp) thermal resistance from junction to solder point full cycle with heatsink compound; see figure 9 --15k/w r th(j-a) thermal resistance from junction to ambient full cycle; printed-circuit board mounted for pad area; see figure 7 -70-k/w full cycle; printed-circuit board mounted for minimum footprint; see figure 8 - 156 - k/w all dimensions are in mm printed-circuit board: fr4 epoxy glass (1.6 mm thick), copper laminate (35 um thick), all dimensions are in mm fig 7. printed-circuit board pad area sot223 fig 8. minimum footprint sot223 001aab5 09 7 4.6 15 36 9 10 18 4.5 60 50 001aab50 8 3.8 min 1.5 min 1.5 min (3 ) 2.3 4.6 6.3 1.5 min
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 7 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch 6. characteristics fig 9. transient thermal impedance from junction to solder point as a function of pulse width 003aac808 1 10 ? 1 10 10 2 z th(j-sp) (k/w) 10 ? 2 t p (s) 10 ? 5 110 10 ? 1 10 ? 2 10 ? 4 10 ? 3 t p p t table 6. characteristics symbol parameter conditions min typ max unit i gt gate trigger current v d =12v; i t = 100 ma; ld+ g-; t j =25c; see figure 10 1- 10ma v d =12v; i t = 100 ma; ld- g-; t j =25c 1- 10ma i l latching current v d =12v; i g =12ma; t j =25c; see figure 11 --30ma i h holding current v d =12v; t j =25c; see figure 12 -925ma v t on-state voltage i t = 1.1 a; see figure 13 --1.3v v gt gate trigger voltage v d =12v; i t =100ma; t j 125 c 0.15 - - v v d =12v; i t =100ma; t j =25c --1v i d off-state current v d =600v; t j 125 c - - 0.2 ma v d =600v; t j 25 c - - 2 a dv d /dt rate of rise of off-state voltage v dm =402v; t j = 125 c; gate open circuit; see figure 14 1000 - - v/s di com /dt rate of change of commutating current v d =400v; t j = 125 c; i t(rms) =1a; dv com /dt = 15 v/s; gate open circuit; see figure 15 ; see figure 16 0.3--a/ms v cl clamping voltage i cl = 100 a; t p =1ms; t j 125 c; see figure 17 650 - - v
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 8 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch (1) ld+ g- (2) ld- g- fig 10. normalized gate trigger current as a function of junction temperature fig 11. normalized latching current as a function of junction temperature v o = 0.758 v; r s = 0.263 ? (1)t j = 125 c; typical values (2)t j = 125 c; maximum values (3)t j = 25 c; maximum values fig 12. normalized holding current as a function of junction temperature fig 13. on-state current as a function of on-state voltage i gt i gt(25 c) t j ( c) ? 50 0 150 100 50 1 2 3 0 003aac809 (1) (2) (1) (2) t j ( c) ? 50 150 100 050 003aac811 1 2 3 0 i l i l(25 c) t j ( c) ? 50 150 100 050 003aac810 1 2 3 0 i h i h(25 c) 003aac812 0.0 0.5 1.0 1.5 2.0 0.0 0.5 1.0 1.5 2.0 v t (v) i t (a) (1) (2) (3)
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 9 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch a is dv d /dt at condition t j c b is dv d /dt at condition t j 125 c a is di com /dt at condition t j c b is di com /dt at condition t j 125 c v d = 400 v fig 14. normalized rate of rise of off-s tate voltage as a function of junction temperature fig 15. normalized critical rate of rise of commutating current as a function of junction temperature a[b] is di com /dt at condition b, dv com /dt a[spec] is the specified data sheet value of di com /dt turn-off time < 20 ms fig 16. normalized critical rate of change of commutating current as a function of critical rate of change of commutating voltage; minimum values fig 17. normalized clamping voltage (upper limit) as a function of junction temperature; minimum values t j ( c) 25 125 100 50 75 003aac813 4 8 12 0 a b 10 6 2 t j ( c) 25 125 100 50 75 003aac814 4 8 12 0 a b 003aac815 0 0.5 1.0 1.5 2.0 10 ? 1 11010 2 b (v/ s) a [b] a [spec] t j ( c) ? 50 150 100 050 003aac817 0.4 0.8 1.2 0 v cl v cl(25 c)
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 10 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch 7. package outline fig 18. package outline sot223 (sc-73) unit a 1 b p cd e e 1 h e l p qy w v references outline version european projection issue date iec jedec jeita mm 0.10 0.01 1.8 1.5 0.80 0.60 b 1 3.1 2.9 0.32 0.22 6.7 6.3 3.7 3.3 2.3 e 4.6 7.3 6.7 1.1 0.7 0.95 0.85 0.1 0.1 0.2 dimensions (mm are the original dimensions) sot223 sc-73 04-11-10 06-03-16 w m b p d b 1 e 1 e a a 1 l p q detail x h e e v m a a b b c y 0 2 4 mm scale a x 13 2 4 p lastic surface-mounted package with increased heatsink; 4 leads sot22 3
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 11 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch 8. revision history table 7. revision history document id release date data sheet status change notice supersedes ACT108W-600E v.5 20100713 product data sheet - ACT108W-600E v.4 modifications: ? various changes to content. ACT108W-600E v.4 20091209 product data sheet - -
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 12 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch 9. legal information 9.1 data sheet status [1] please consult the most recently issued document before initiating or completing a design. [2] the term 'short data sheet' is explained in section "definitions". [3] the product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple de vices. the latest product status information is available on the internet at url http://www.nxp.com . 9.2 definitions draft ? the document is a draft version only. the content is still under internal review and subject to formal approval, which may result in modifications or additions. nxp semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall hav e no liability for the consequences of use of such information. short data sheet ? a short data sheet is an extract from a full data sheet with the same product type number(s) and title. a short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. for detailed and full information see the relevant full data sheet, which is available on request vi a the local nxp semiconductors sales office. in case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. product specification ? the information and data provided in a product data sheet shall define the specification of the product as agreed between nxp semiconductors and its customer , unless nxp semiconductors and customer have explicitly agreed otherwis e in writing. in no event however, shall an agreement be valid in which the nxp semiconductors product is deemed to offer functions and qualities beyond those described in the product data sheet. 9.3 disclaimers limited warranty and liability ? information in this document is believed to be accurate and reliable. however, nxp semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. in no event shall nxp semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interrupt ion, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. notwithstanding any damages that customer might incur for any reason whatsoever, nxp semiconductors? aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the terms and conditions of commercial sale of nxp semiconductors. right to make changes ? nxp semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use ? nxp semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an nxp semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. nxp semiconductors accepts no liability for inclusion and/or use of nxp semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer?s own risk. applications ? applications that are described herein for any of these products are for illustrative purpos es only. nxp semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. nxp semiconductors does not accept any liability related to any default, damage, costs or problem which is based on a weakness or default in the customer application/use or the application/use of customer?s third party customer(s) (hereinafter both referred to as ?application?). it is customer?s sole responsibility to check whether the nxp semiconductors product is suitable and fit for the application planned. customer has to do all necessary testing for the application in order to avoid a default of the application and the product. nxp semiconducto rs does not accept any liability in this respect. quick reference data ? the quick reference data is an extract of the product data given in the limiting values and characteristics sections of this document, and as such is not comp lete, exhaustive or legally binding. limiting values ? stress above one or more limiting values (as defined in the absolute maximum ratings system of iec 60134) will cause permanent damage to the device. limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the recommended operating conditions section (if present) or the characteristics sections of this document is not warranted. constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. terms and conditions of commercial sale ? nxp semiconductors products are sold subject to the gener al terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , unless otherwise agreed in a valid written individual agreement. in case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. nxp semiconductors hereby expressly objects to applying the customer?s general terms and conditions with regard to the purchase of nxp semiconducto rs products by customer. no offer to sell or license ? nothing in this document may be interpreted or construed as an offer to sell products t hat is open for acceptance or the grant, conveyance or implication of any lic ense under any copyrights, patents or other industrial or intellectual property rights. export control ? this document as well as th e item(s) described herein may be subject to export control regulati ons. export might require a prior authorization from national authorities. document status [1] [2] product status [3] definition objective [short] data sheet development this document contains data from the objective specification for product development. preliminary [short] data sheet qualific ation this document contains data fr om the preliminary specification. product [short] data sheet production this doc ument contains the product specification.
ACT108W-600E all information provided in this document is subject to legal disclaimers. ? nxp b.v. 2010. all rights reserved. product data sheet rev. 5 ? 13 july 2010 13 of 14 nxp semiconductors ACT108W-600E ac thyristor power switch non-automotive qualified products ? unless this data sheet expressly states that this specific nxp semicon ductors product is automotive qualified, the product is not suitable for automotive use. it is neither qualified nor tested in accordance with automotive testing or application requirements. nxp semiconductors accepts no liabili ty for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. in the event that customer uses t he product for design-in and use in automotive applications to automotive s pecifications and standards, customer (a) shall use the product without nxp semiconductors? warranty of the product for such automotive applicat ions, use and specifications, and (b) whenever customer uses the product for automotive applications beyond nxp semiconductors? specifications such use shall be solely at customer?s own risk, and (c) customer fully in demnifies nxp semi conductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive appl ications beyond nxp semiconductors? standard warranty and nxp semicond uctors? product specifications. 9.4 trademarks notice: all referenced brands, produc t names, service names and trademarks are the property of their respective owners. adelante , bitport , bitsound , coolflux , coreuse , desfire , ez-hv , fabkey , greenchip , hipersmart , hitag , i2c-bus logo, icode , i-code , itec , labelution , mifare , mifare plus , mifare ultralight , moreuse , qlpak , silicon tuner , siliconmax , smartxa , starplug , topfet , trenchmos , trimedia and ucode ? are trademarks of nxp b.v. hd radio and hd radio logo ? are trademarks of ibiquity digital corporation. 10. contact information for more information, please visit: http://www.nxp.com for sales office addresses, please send an email to: salesaddresses@nxp.com
nxp semiconductors ACT108W-600E ac thyristor power switch ? nxp b.v. 2010. all rights reserved. for more information, please visit: http://www.nxp.com for sales office addresses, please se nd an email to: salesaddresses@nxp.com date of release: 13 july 2010 document identifier: ACT108W-600E please be aware that important notices concerning this document and the product(s) described herein, have been included in section ?legal information?. 11. contents 1 product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.1 general description . . . . . . . . . . . . . . . . . . . . . .1 1.2 features and benefits . . . . . . . . . . . . . . . . . . . . .1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.4 quick reference data . . . . . . . . . . . . . . . . . . . . .1 2 pinning information . . . . . . . . . . . . . . . . . . . . . . .2 3 ordering information . . . . . . . . . . . . . . . . . . . . . .2 4 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .3 5 thermal characteristics . . . . . . . . . . . . . . . . . . .6 6 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . .7 7 package outline . . . . . . . . . . . . . . . . . . . . . . . . .10 8 revision history . . . . . . . . . . . . . . . . . . . . . . . . . 11 9 legal information. . . . . . . . . . . . . . . . . . . . . . . .12 9.1 data sheet status . . . . . . . . . . . . . . . . . . . . . . .12 9.2 definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 9.3 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 9.4 trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .13 10 contact information. . . . . . . . . . . . . . . . . . . . . .13

▲Up To Search▲

Price & Availability of ACT108W-600E

	To Download ACT108W-600E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .